AutoStop Mini Plus Brake Meter

MAKE SURE IT STOPS WITH AUTOSTOP

The AutoStop® MiniPlus Brake Meter is a compact, battery-powered, in-vehicle brake performance tester that uses state of the art, multi-channel sensors to measure tri-axial deceleration of any type of vehicle or motorcycle.

  • Compliant with roadworthy regulations around Australia
  • Compliant with AS2958 Australian Standard
  • Compliant with SANS 1589 brake testing
  • Compliant with SANS 10047 brake testing
  • Compliant with ECE R13 – Rule 13
  • Compliant with Federal Regulation FMVSS 135 and FMVSS 571 – USA
  • Compliant with Transport Canada – CMVSS 135
  • Calibration that is internationally traceable through NATA (accreditation #20559)
  • Measures forward deceleration, speed, stopping distance and lateral lane deviation
  • Variety of display options including MFDD, g or % imperial or metric
  • 24 month calibration interval
  • One of the most versatile brake testers on the market
  •  Data logging and download to PC through USB interface – USB cable included
  • Compatible with remote AutoTest BlueTooth Printer
  • Optional Bluetooth interface direct to remote printer
  • Upgrade to AutoStop® MiniPlus-GPS Equipped with a built in GPS/Glonass receiver that will provide the latitude and longitude of the position where the test was carried out

Scroll down to see AutoStop® Mini Plus Brake Meter instructional video.

 

BRAKE REGULATION SUMMARY:

The UNECE (United Nations Economic Commission for Europe) has published a table of Brake Regulation Requirements for every country.

 

What is the Purpose of the Brake Test?

The purpose of the brake test is to see if a vehicle’s braking performance is consistent with your experience of other vehicles of a similar make and model. Most vehicles will achieve 0.6g (light vehicles) with the rear brakes inoperative, so you should look for a lower than average reading for that make or type of vehicle. Lower than expected readings indicate that something is wrong. It is important that the brake tester is seen as a diagnostic tool and not just a pass/fail gauge.

 

 

Upgrade your AutoStop Mini Plus brake meter to include GPS!

The Department of Transport and Main Roads (TMR) QLD is updating a requirement for brake testing.

As of September 2021 it will be mandatory for Approved Examiners to keep a copy of the brake test results, including GPS location, time and date, when undertaking LV, HV and MC inspection types.

To make sure you are compliant, purchase our AutoStop® Mini Plus brake meter with the upgrade that includes GPS location. If you already have our standard AutoStop® Mini Plus brake meter, you may be able to upgrade to have GPS!

Some of the older brake testers may not be able to, so call our friendly service team to see if yours can be upgraded. ​

Scroll down to see AutoStop® Mini Plus Brake Meter instructional video.

 

Find a Distributor Get a Quote

Product Downloads

Click here for product software, manuals and brochures.


AutoStop MiniPlus Brochure
AutoStop MiniPlus Datalogger Software
AutoStop MiniPlus User Manual
AutoTest Bluetooth Printer Manual
FAQ AutoStop Mini